Skip to main content
BrewMarkBREWMARK

Kafatek · Dial-in guide

Kafatek Monolith Flat Max grind settings

Why there is no single number for the Kafatek Monolith Flat Max, and how to find a starting point on your own unit instead.

Kafatek Monolith Flat Max
AdjustmentStepless
CollarUnmarked
BurrsFlat
Published settingNone

Why there is no setting here

The Monolith Flat Max adjusts on an unmarked stepless collar, and Kafatek has changed both the dial and the thread pitch between versions. A rotation on one unit does not move the burrs the same distance as a rotation on another, so there is no number one owner can read off and another can copy.

We used to print one anyway. It was a placeholder entered when the catalog was built, and it was never read off a real dial. An owner wrote in to say it was wrong, and he was right. Rather than replace one guess with another, we no longer publish a setting for this grinder.

Dialing in from your own reference point

Starting guidance from owners, not a specification. Sour or weak means go finer; bitter or harsh means go coarser.

  1. 01Find your own zero. With the grinder empty, close the burrs slowly until you hear them just begin to touch, then stop — never force them together, and follow Kafatek’s own instructions for your version.
  2. 02Mark that point on the collar with a pencil line or a piece of tape. That mark is your reference, and it only means something on your grinder.
  3. 03Count rotations open from the mark, in whatever fractions your own indicator shows, and write down where each coffee lands.
  4. 04For espresso, owners report starting about half a rotation open from zero, then going coarser by taste and shot time.
  5. 05For pour over, expect a couple of rotations open. One owner of an early Flat Max, where a rotation is the red indicator going from 0 round to its 10 mark, lands at 2.3–2.7 rotations — that is one unit’s reading, not a setting for yours.

If you own a Monolith Flat Max and keep notes on where your coffees land, tell us which version you have and what you found. One unit’s reading is not a chart, but several might show us what does and does not transfer.

Dialing in the Monolith Flat Max

The large flat-burr Monolith, built for clarity rather than body. Its stepless collar is unmarked in any standardised way, and Kafatek changed the dial and the thread pitch between versions, so a rotation count from one Flat Max does not transfer to another. We no longer publish a setting for it; your own reference mark is the only number that means anything here.

Corrections to this page

  • 2026-10-21The Monolith pages no longer give a number. Kafatek has changed the dial and thread between versions, and the collar is unmarked, so no figure holds across units. The pages now explain how to dial in from your own zero point.
Every correction, with what the page said before →

Own a Monolith Flat Max? Tell us your setting

If you’ve dialled in a method on your own Monolith Flat Max, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts