Mazzer Super JollyMazzer · Dial-in guide
Mazzer Super Jolly grind settings
Why there is no single number for the Mazzer Super Jolly, and how to find a starting point on your own unit instead.

Why there is no setting here
The Mazzer Super Jolly adjusts on a stepless collar with printed numbers and notches. Mazzer gives its starting points as a count of numbers and notches from the point where the burrs touch, and that point is not the same on every unit, so a number read off one Super Jolly does not mean the same grind on another.
We used to print a chart anyway, counted in whole rotations of the collar, on the same model as the Mini. Mazzer counts in collar numbers, and a forum measurement of the Mini’s thread suggests a full turn spans about ten of them, which made our filter figure far coarser than any brew method. Mazzer does not say how many notches make a number, so we cannot convert its reference points into a chart for every method, and we no longer publish one.
Dialing in from your own reference point
Starting guidance from Mazzer, not a specification. Sour or weak means go finer; bitter or harsh means go coarser.
- 01Find the point of contact first. With the grinder empty and the motor off, as Mazzer instructs, turn the collar finer slowly until the burrs just touch, then stop and note which number and notch sit at the indicator. That is your reference, and it only means something on your grinder.
- 02Mazzer’s own tutorial (https://www.mazzer.com/en/tutorial-mini/) suggests espresso on the Super Jolly, and on the Super Jolly grinder-doser, at approximately 1 number and 4 notches from the point of contact of the burrs.
- 03On the Super Jolly Elec, Mazzer suggests espresso at approximately 2 numbers from the point of contact; on the Super Jolly V Pro, at approximately 3 and 1/2 numbers.
- 04Mazzer calls these “an indicative reference that will need to be adapted to your own coffee type”. Count from your own point of contact, then go finer or coarser by taste and shot time.
- 05Write down where each coffee lands, counted in numbers and notches from your contact point, so you can return to it. Mazzer gives no starting point for other brew methods on these models, and we do not invent one.
If you own a Super Jolly and keep notes on where your coffees land, tell us which version you have and what you found. One unit’s reading is not a chart, but several might show us what does and does not transfer.
Dialing in the Super Jolly
A commercial espresso workhorse that has been in cafés for decades and turns up constantly on the used market. Large flat burrs, and a design that assumes you are grinding continuously rather than single dosing, so expect retention unless it has been modified. Its stepless collar has printed numbers, but Mazzer counts them from where the burrs touch, and that point differs between units, so we no longer publish a setting for it: start from Mazzer's own reference points and your own contact point.
Corrections to this page
- 2026-10-22The Mazzer pages no longer give a full chart. The contact point differs between units and Mazzer doesn't say how many notches make a number, so no figure holds across units. The pages now quote Mazzer's own reference points, such as espresso about 1 number and 4 notches from contact, and explain how to dial in from there.
Own a Super Jolly? Tell us your setting
If you’ve dialled in a method on your own Super Jolly, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.