Which to buy · Every setting
Baratza Encore vs Fellow Ode Gen 1
Conical against flat — the Encore's scale curves where the other runs straight. The Ode Gen 1 is numbered 1–11; the Encore is numbered 1–40.
Which to buy
Choose the
Encore if you…
- want a hopper to grind from — it holds 300 g
- want 40 mm conical burrs
- want a grinder you can repair — Baratza sells repair parts
Choose the
Ode Gen 1 if you…
- want 64 mm flat burrs
- weigh each dose — it stops itself when the last bean is ground
- already own one, or are buying used — Fellow lists it as sold out
Shop links are affiliate links: BrewMark earns a commission if you buy through one, at no extra cost to you. The verdicts were written without regard to it.
Fellow now sells the Ode Gen 2 in place of the original; the settings on this page are for the Gen 1.
Sources: Fellow — Ode Gen 1 (archived) · Fellow — Ode Brew Grinder · Baratza — Encore
| Encore | Ode Gen 1 | |
|---|---|---|
| Brand | Baratza | Fellow |
| Scale | Numbered dial | Numbered dial |
| Dial range | 1 – 40 | 1 – 11 |
| Burrs | Conical | Flat |
| Espresso → filter | 8.4 numbers | 2.6 numbers |
| Filter → coarse | 25 numbers | 7.4 numbers |
The same number means different things
Both grinders use a numbered dial, which makes it tempting to copy a number straight across. Setting 6 sits at grind index 0 on the Encore but 56.7 on the Ode Gen 1 — far enough apart to change the cup.
Converting a setting
If a recipe quotes a setting for one of these grinders, read across for the equivalent on the other. Rows are spaced evenly by grind size, not by dial number — on a conical burr those are not the same thing.
| Encore | Ode Gen 1 |
|---|---|
| 7 | 1 |
| 9 | 1.1 |
| 11 | 1.2 |
| 12 | 2.2 |
| 14 | 3 |
| 16 | 3.2 |
| 18 | 5 |
| 22 | 6.1 |
| 25 | 7.1 |
| 28 | 8.1 |
| 32 | 9.1 |
| 36 | 10 |
| 40 | 11 |
| Ode Gen 1 | Encore |
|---|---|
| 1 | 7 |
| 1.1 | 9 |
| 1.2 | 11 |
| 2.2 | 12 |
| 3 | 14 |
| 3.2 | 16 |
| 5 | 18 |
| 6.1 | 22 |
| 7.1 | 25 |
| 8.1 | 28 |
| 9.1 | 32 |
| 10 | 36 |
| 11 | 40 |
Side by side, by brew method
Where each grinder lands for the same brew, worked out from its own dial curve.
| Method | Encore | Ode Gen 1 |
|---|---|---|
| Espresso | 8 | 1.1 |
| Moka pot | 11 | 1.2 |
| AeroPress (short steep) | 12 | 2.2 |
| Pour over — V60 / cone | 15 | 3.1 |
| Siphon | 16 | 4 |
| Pour over — flat bottom | 17 | 4.1 |
| Steep and release — Clever / Switch | 18 | 4.2 |
| Drip / batch brew | 18 | 5 |
| Cupping | 19 | 3 |
| Chemex | 20 | 6.1 |
| French press | 28 | 8 |
| Cold brew | 34 | 9.2 |
The shape of each dial
Where the connectors bunch, that grinder’s dial is compressed and single steps count for more. Comparing the two shapes tells you which gives finer control, and where.
Baratza Encore
Fellow Ode Gen 1
Dialing in the Encore
The Encore is the default first grinder for filter coffee, and its scale is the one most recipes are implicitly written against. Its stepped collar is honest about what it is: excellent from medium-fine upward, progressively less consistent as you go finer. Treat the bottom of the range as a moka-pot floor rather than an espresso range — Baratza built the Encore ESP precisely because this one was never meant to reach it. If your cup tastes thin at the recommended setting, go one step finer rather than two; the steps here are wider than they look.
Dialing in the Ode Gen 1
The original Ode had noticeably more fines than the Gen 2 that replaced it, which is why the Gen 2 burr upgrade became such a common retrofit. If you are running Gen 1 burrs, expect to sit slightly coarser than published Ode numbers to get the same cup.