Skip to main content
BrewMarkBREWMARK

Which to buy · Every setting

Eureka Oro Mignon XL vs Fellow Ode Gen 1

Two grinders cross-shopped at the same money. The Ode Gen 1 is numbered 1–11; the Oro Mignon XL turns 0–24 rotations.

Eureka Oro Mignon XL

Eureka

Oro Mignon XL

About $899

Fellow Ode Gen 1

Fellow

Ode Gen 1

No longer sold new

Which to buy

Choose the

Oro Mignon XL if you…

  • want two programmable timed doses and a dose counter
  • want a hopper to grind from — it holds 300 g
  • grind into a portafilter — a universal fork and a tamping station come with it

Choose the

Ode Gen 1 if you…

  • brew filter only — Fellow says the Ode does not grind for espresso
  • weigh each dose — it stops itself when the last bean is ground
  • already own one, or are buying used — Fellow lists it as sold out

Shop links are affiliate links: BrewMark earns a commission if you buy through one, at no extra cost to you. The verdicts were written without regard to it.

Fellow now sells the Ode Gen 2 in place of the original; the settings on this page are for the Gen 1.

Sources: Fellow — Ode Gen 1 (archived) · Fellow — Ode Brew Grinder · Eureka — Mignon XL

Eureka Oro Mignon XL and Fellow Ode Gen 1 specifications compared
Oro Mignon XLOde Gen 1
BrandEurekaFellow
ScaleRotationsNumbered dial
Dial range0.0 rotations – 24.0 rotations1 – 11
BurrsFlatFlat
Espresso → filter6.5 rotations2.6 numbers
Filter → coarse7 rotations7.4 numbers

Converting a setting

If a recipe quotes a setting for one of these grinders, read across for the equivalent on the other. Rows are spaced evenly by grind size, not by dial number — on a conical burr those are not the same thing.

Oro Mignon XL → Ode Gen 1
Oro Mignon XLOde Gen 1
1.51
31.1
41.2
5.52.2
1+13
1+23.2
1+35
1+46.1
1+57.1
2+08.1
2+19.1
2+210
2+311
Ode Gen 1 → Oro Mignon XL
Ode Gen 1Oro Mignon XL
11.5
1.13
1.24
2.25.5
31+1
3.21+2
51+3
6.11+4
7.11+5
8.12+0
9.12+1
102+2
112+3

Side by side, by brew method

Where each grinder lands for the same brew, worked out from its own dial curve.

Eureka Oro Mignon XL and Fellow Ode Gen 1 settings for every brew method
MethodOro Mignon XLOde Gen 1
Espresso2.51.1
Moka pot41.2
AeroPress (short steep)5.52.2
Pour over — V60 / cone1+1.53.1
Siphon1+24
Pour over — flat bottom1+2.54.1
Steep and release — Clever / Switch1+34.2
Drip / batch brew1+35
Cupping1+3.53
Chemex1+46.1
French press1+5.58
Cold brew2+1.59.2

The shape of each dial

Where the connectors bunch, that grinder’s dial is compressed and single steps count for more. Comparing the two shapes tells you which gives finer control, and where.

Eureka Oro Mignon XL

FINECOARSEGRIND INDEX 0–1000.024.0EUREKA ORO MIGNON XL DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Fellow Ode Gen 1

FINECOARSEGRIND INDEX 0–100111FELLOW ODE GEN 1 DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Dialing in the Oro Mignon XL

Eureka's Oro line sits above the standard Mignons. Like the rest of the Mignons it is built espresso-first, so treat the coarse end of the dial as usable rather than its strength.

Dialing in the Ode Gen 1

The original Ode had noticeably more fines than the Gen 2 that replaced it, which is why the Gen 2 burr upgrade became such a common retrofit. If you are running Gen 1 burrs, expect to sit slightly coarser than published Ode numbers to get the same cup.

Eureka Oro Mignon XL vs Fellow Ode Gen 1: Which to Buy