Which to buy · Every setting
Eureka Mignon Specialita vs Turin DF64E V2
Two grinders cross-shopped at the same money. The Mignon Specialita turns 0–24 rotations; the DF64E V2 is numbered 0–60.
Which to buy
Choose the
Mignon Specialita if you…
- brew filter as well — Eureka lists it as all purpose
- want 55 mm hardened steel flat burrs
- want to buy new
Choose the
DF64E V2 if you…
- pull espresso only — Turin recommends the DF64E for espresso only
- mostly single-dose but sometimes want a hopper — a 225 g hopper and a bellows come with it
- want to clean the burr chamber without losing your setting
Turin no longer sells the DF64E: its product page now returns not found, and Turin's current range lists the DF64 Gen 2 (2.7) instead. The settings on this page are for the DF64E.
Sources: Eureka — Mignon Specialità · Turin — DF64E (archived May 2023)
| Mignon Specialita | DF64E V2 | |
|---|---|---|
| Brand | Eureka | Turin |
| Scale | Rotations | Numbered dial |
| Dial range | 0.0 rotations – 24.0 rotations | 0 – 60 |
| Burrs | Flat | Flat |
| Espresso → filter | 6.5 rotations | 23 numbers |
| Filter → coarse | 7 rotations | 22 numbers |
Converting a setting
If a recipe quotes a setting for one of these grinders, read across for the equivalent on the other. Rows are spaced evenly by grind size, not by dial number — on a conical burr those are not the same thing.
| Mignon Specialita | DF64E V2 |
|---|---|
| 1.5 | 5 |
| 3 | 10 |
| 4 | 14.9 |
| 5.5 | 19.6 |
| 1+1 | 24.3 |
| 1+2 | 28.6 |
| 1+3 | 31.7 |
| 1+4 | 34.7 |
| 1+5 | 37.8 |
| 2+0 | 40.8 |
| 2+1 | 43.9 |
| 2+2 | 46.9 |
| 2+3 | 50 |
| DF64E V2 | Mignon Specialita |
|---|---|
| 5 | 1.5 |
| 10 | 3 |
| 14.9 | 4 |
| 19.6 | 5.5 |
| 24.3 | 1+1 |
| 28.6 | 1+2 |
| 31.7 | 1+3 |
| 34.7 | 1+4 |
| 37.8 | 1+5 |
| 40.8 | 2+0 |
| 43.9 | 2+1 |
| 46.9 | 2+2 |
| 50 | 2+3 |
Side by side, by brew method
Where each grinder lands for the same brew, worked out from its own dial curve.
| Method | Mignon Specialita | DF64E V2 |
|---|---|---|
| Espresso | 2.5 | 8 |
| Moka pot | 4 | 14 |
| AeroPress (short steep) | 5.5 | 19.6 |
| Pour over — V60 / cone | 1+1.5 | 26.9 |
| Pour over — flat bottom | 1+2.5 | 29.8 |
| Drip / batch brew | 1+3 | 31.7 |
| Chemex | 1+4 | 34.6 |
| French press | 1+5.5 | 39.7 |
| Cold brew | 2+1.5 | 45.6 |
The shape of each dial
Where the connectors bunch, that grinder’s dial is compressed and single steps count for more. Comparing the two shapes tells you which gives finer control, and where.
Eureka Mignon Specialita
Turin DF64E V2
Dialing in the Mignon Specialita
A stepless espresso grinder first, everything else second. The micrometric adjustment means small movements do real work at the fine end, and the settings below should be read as starting positions rather than detents. It will grind for filter and does it competently, but you are working at the far edge of a dial designed for a different job.
Dialing in the DF64E V2
The DF64 platform with a different motor and control scheme, sold under the Turin badge. Grind behaviour tracks the DF64 family closely; as with the rest of that platform, the burrs fitted define the character.
Decided?
Where to buy
These are affiliate links: if you buy through one, BrewMark earns a commission at no extra cost to you. It does not change the numbers on this page — the settings above are worked out from each grinder’s own dial curve, and were written before any of these links existed.
Own a different grinder?
Convert between any two of 200+ models
The converter runs the same maths for any pair in the catalog.
Open the grind converter →Send me both charts
Every setting for the Eureka Mignon Specialita and the Turin DF64E V2, side by side in your inbox.
One email with both charts. Nothing else unless you ask.
Switching grinders mid-bag?
Log a brew, say how it tasted, and BrewMark tells you which way to move — in whichever grinder’s numbers you are actually using. Free on iOS.
Get the iOS app