Skip to main content
BrewMarkBREWMARK

Hario · Dial-in chart

Hario Mini Mill Slim grind settings

On the Hario Mini Mill Slim, start pour over at 6 clicks, espresso at 2 clicks and French press at 10 clicks. Every other method, with the range to adjust in, is below.

Hario Mini Mill Slim
Dial range0 clicks – 20 clicks
ScaleClicks
BurrsConical
Filter reference6 clicks

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Mini Mill Slim’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100020HARIO MINI MILL SLIM DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Mini Mill Slim grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

Hario Mini Mill Slim grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.2 clicksestimated1 clicks – 4 clicks
Moka potFiner than filter, coarser than espresso. No tamping.4 clicksestimated4 clicks – 5 clicks
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.5 clicksestimatedat dial limit
Pour over — V60 / coneThe reference point for most published pour-over recipes.6 clicksestimated5 clicks – 7 clicks
SiphonMedium. Short contact over steady heat, so start here and taste.6 clicksestimated6 clicks – 7 clicks
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.7 clicksestimated6 clicks – 8 clicks
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.7 clicksestimated6 clicks – 8 clicks
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.7 clicksestimated7 clicks – 8 clicks
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.8 clicksestimated7 clicks – 8 clicks
ChemexThe thick filter needs a coarser grind to avoid stalling.8 clicksestimated8 clicks – 10 clicks
French pressCoarse. Too fine here is the usual cause of a muddy cup.10 clicksestimated9 clicks – 11 clicks
Cold brewCoarsest setting you have. 12–18 hours of contact.12 clicksestimated11 clicks – 13 clicks

Hario doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Mini Mill Slim reads differently, tell us.

Every grinder on one grind size chart →
Hario Mini Mill Slim grind size chart: espresso 2 clicks, V60 pour over 6 clicks, French press 10 clicks, and 9 more brew methods.
The Hario Mini Mill Slim grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

How much room you have to adjust

Espresso → filter5clicks of adjustment across the fine half of the dial
Filter → coarse7clicks covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Mini Mill Slim. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

AeroPress (short steep) sits at the end of the Mini Mill Slim’s travel — you can reach it, but there is no room left to adjust further in that direction.

Dialing in the Mini Mill Slim

Count clicks the way Hario does: turn the knob until it stops, back it off to the first click, and call that 0. Hario's own guide puts fine grinds at 4 clicks, medium at 7–8 and coarse at 9–10.

Coming from another grinder?

Convert a grind setting to the Mini Mill Slim

If a recipe quotes a setting for a different grinder, this maps it onto the Mini Mill Slim’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Mini Mill Slim yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Mini Mill Slim are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

The Mini Mill Slim joined the catalog in October 2026. Hario doesn’t publish a brew-method chart for it that we could find, so its reference points are estimated by comparison with grinders whose makers do. These numbers are counted (clicks from zero) from where the burrs just touch, not read off a scale printed on the grinder, so count the same way; the dial may run further than this chart. They are a starting point rather than a specification; if your Mini Mill Slim reads differently, tell us.

Because the Mini Mill Slim uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a Mini Mill Slim? Tell us your setting

If you’ve dialled in a method on your own Mini Mill Slim, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts