Skip to main content
BrewMarkBREWMARK

KINGrinder · Dial-in chart

KINGrinder K5 grind settings

On the KINGrinder K5, start pour over at 75 clicks, espresso at 45 clicks and French press at 115 clicks. Every other method, with the range to adjust in, is below.

Dial range0 clicks – 140 clicks
ScaleClicks
BurrsConical
Filter reference77 clicks

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the K5’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–1000140KINGRINDER K5 DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

K5 grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

KINGrinder K5 grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.45 clicksestimated36 clicks – 58 clicks
Moka potFiner than filter, coarser than espresso. No tamping.62 clicksestimated58 clicks – 67 clicks
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.69 clicksestimated67 clicks – 72 clicks
Pour over — V60 / coneThe reference point for most published pour-over recipes.75 clicksestimated73 clicks – 82 clicks
SiphonMedium. Short contact over steady heat, so start here and taste.79 clicksestimated74 clicks – 87 clicks
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.82 clicksestimated77 clicks – 91 clicks
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.86 clicksestimated79 clicks – 95 clicks
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.88 clicksestimated82 clicks – 99 clicks
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.91 clicksestimated83 clicks – 99 clicks
ChemexThe thick filter needs a coarser grind to avoid stalling.99 clicksestimated91 clicks – 109 clicks
French pressCoarse. Too fine here is the usual cause of a muddy cup.115 clicksestimated108 clicks – 122 clicks
Cold brewCoarsest setting you have. 12–18 hours of contact.127 clicksestimated122 clicks – 136 clicks

KINGrinder doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your K5 reads differently, tell us.

Every grinder on one grind size chart →
KINGrinder K5 grind size chart: espresso 45 clicks, V60 pour over 75 clicks, French press 115 clicks, and 9 more brew methods.
The KINGrinder K5 grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

How much room you have to adjust

Espresso → filter41clicks of adjustment across the fine half of the dial
Filter → coarse59clicks covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the K5. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Coming from another grinder?

Convert a grind setting to the K5

If a recipe quotes a setting for a different grinder, this maps it onto the K5’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the K5 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the K5 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

The K5 joined the catalog in October 2026. KINGrinder doesn’t publish a brew-method chart for it that we could find, so its reference points are estimated by comparison with grinders whose makers do. These numbers are counted (clicks from zero) from where the burrs just touch, not read off a scale printed on the grinder, so count the same way; the dial may run further than this chart. They are a starting point rather than a specification; if your K5 reads differently, tell us.Maker’s details: kingrinder.com.

Because the K5 uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a K5? Tell us your setting

If you’ve dialled in a method on your own K5, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts