Skip to main content
BrewMarkBREWMARK

Mahlkönig · Dial-in chart

Mahlkönig EK43 (1-11 dial) grind settings

On the Mahlkönig EK43 (1-11 dial), start pour over at 6.5, espresso at 3.3 and French press at 9.8. Every other method, with the range to adjust in, is below.

Shown: the current EK43. There is no photo of the 1–11 dial version itself.
Shown: the current EK43. There is no photo of the 1–11 dial version itself.
Dial range1 – 11
ScaleNumbered dial
BurrsFlat
Filter reference6.6

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the EK43 (1-11 dial)’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100111MAHLKÖNIG EK43 (1-11 DIAL) DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

EK43 (1-11 dial) grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

Mahlkönig EK43 (1-11 dial) grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.3.3estimated2.3 – 4.8
Moka potFiner than filter, coarser than espresso. No tamping.5.4estimated4.8 – 5.6
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.5.9estimated5.6 – 6.2
Pour over — V60 / coneThe reference point for most published pour-over recipes.6.5estimated6.3 – 7.1
SiphonMedium. Short contact over steady heat, so start here and taste.6.8estimated6.4 – 7.6
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.7.1estimated6.6 – 7.9
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.7.5estimated6.8 – 8.2
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.7.7estimated7.1 – 8.5
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.7.9estimated7.2 – 8.5
ChemexThe thick filter needs a coarser grind to avoid stalling.8.5estimated7.9 – 9.3
French pressCoarse. Too fine here is the usual cause of a muddy cup.9.8estimated9.2 – 10.2
Cold brewCoarsest setting you have. 12–18 hours of contact.10.5estimated10.2 – 11

Mahlkönig doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your EK43 (1-11 dial) reads differently, tell us.

Every grinder on one grind size chart →
Mahlkönig EK43 (1-11 dial) grind size chart: espresso 3.3, V60 pour over 6.5, French press 9.8, and 9 more brew methods.
The Mahlkönig EK43 (1-11 dial) grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

How much room you have to adjust

Espresso → filter4.4numbers of adjustment across the fine half of the dial
Filter → coarse4.4numbers covering filter through to cold brew
Curvelinearflat burrs, interpolated linearly

That is the resolution you actually have to work with on the EK43 (1-11 dial). Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Coming from another grinder?

Convert a grind setting to the EK43 (1-11 dial)

If a recipe quotes a setting for a different grinder, this maps it onto the EK43 (1-11 dial)’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the EK43 (1-11 dial) yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the EK43 (1-11 dial) are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

The EK43 (1-11 dial) joined the catalog in October 2026. Its reference points are the EK43's checked points on the newer 0-16 dial, relabelled for the older 1-11 faceplate (which marks the same burr travel). They are a starting point rather than a specification; if your EK43 (1-11 dial) reads differently, tell us.Maker’s details: web.archive.org.

The EK43 (1-11 dial)’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a EK43 (1-11 dial)? Tell us your setting

If you’ve dialled in a method on your own EK43 (1-11 dial), the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts