Skip to main content
BrewMarkBREWMARK

Timemore · Dial-in chart

Timemore Chestnut Nano grind settings

On the Timemore Chestnut Nano, start pour over at 21 clicks, espresso at 12 clicks and French press at 26 clicks. Every other method, with the range to adjust in, is below.

Dial range0 clicks – 30 clicks
ScaleClicks
BurrsConical
Filter reference21 clicks

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Chestnut Nano’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100030TIMEMORE CHESTNUT NANO DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Chestnut Nano grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

Timemore Chestnut Nano grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.12 clicksmaker’s chart10 clicks – 14 clicks
Moka potFiner than filter, coarser than espresso. No tamping.18 clicksestimated17 clicks – 19 clicks
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.20 clicksestimated19 clicks – 21 clicks
Pour over — V60 / coneThe reference point for most published pour-over recipes.21 clicksmaker’s chart18 clicks – 24 clicks
SiphonMedium. Short contact over steady heat, so start here and taste.22 clicksestimated21 clicks – 23 clicks
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.22 clicksestimated21 clicks – 23 clicks
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.22 clicksestimated22 clicks – 23 clicks
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.23 clicksestimated22 clicks – 24 clicks
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.23 clicksestimated22 clicks – 24 clicks
ChemexThe thick filter needs a coarser grind to avoid stalling.24 clicksestimated23 clicks – 25 clicks
French pressCoarse. Too fine here is the usual cause of a muddy cup.26 clicksmaker’s chart25 clicks – 27 clicks
Cold brewCoarsest setting you have. 12–18 hours of contact.28 clicksestimated27 clicks – 30 clicks

Maker’s chart settings are Timemore’s own, from Chestnut Nano manual, "How to Adjust". Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.

Every grinder on one grind size chart →
Timemore Chestnut Nano grind size chart: espresso 12 clicks, V60 pour over 21 clicks, French press 26 clicks, and 9 more brew methods.
The Timemore Chestnut Nano grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

How much room you have to adjust

Espresso → filter12.6clicks of adjustment across the fine half of the dial
Filter → coarse8.8clicks covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Chestnut Nano. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Coming from another grinder?

Convert a grind setting to the Chestnut Nano

If a recipe quotes a setting for a different grinder, this maps it onto the Chestnut Nano’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Chestnut Nano yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Chestnut Nano are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Timemore publishes its own brew-method chart for the Chestnut Nano, and we checked every number against it. The chart above prints Timemore’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Chestnut Nano manual, "How to Adjust".

Because the Chestnut Nano uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Chestnut Nano? Tell us your setting

If you’ve dialled in a method on your own Chestnut Nano, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts