1Zpresso J-Ultra1Zpresso · Dial-in chart
1Zpresso J-Ultra grind settings
On the 1Zpresso J-Ultra, start pour over at 288 clicks, espresso at 139 clicks and French press at 421 clicks. Every other method, with the range to adjust in, is below.

The shape of this dial
The top line is the universal grind index every BrewMark recipe uses. The bottom line is the J-Ultra’s own dial. The connectors show how one maps onto the other.
J-Ultra grind size chart, by brew method
Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the J-Ultra? Start here.
| Method | Setting | Range |
|---|---|---|
| TurkishPowder-fine, finer than espresso. | 98 clicksmaker’s chart | 75 clicks – 120 clicks |
| EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe → | 139 clicksmaker’s chart | 100 clicks – 170 clicks |
| Moka potFiner than filter, coarser than espresso. No tamping.Recipe → | 218 clicksmaker’s chart | 200 clicks – 270 clicks |
| AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe → | 257 clicksmaker’s chart | 200 clicks – 270 clicks |
| Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe → | 288 clicksmaker’s chart | 270 clicks – 330 clicks |
| SiphonMedium. Short contact over steady heat, so start here and taste. | 302 clicksmaker’s chart | 270 clicks – 330 clicks |
| Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe → | 314 clicksestimated | 295 clicks – 342 clicks |
| Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe → | 326 clicksestimated | 302 clicks – 355 clicks |
| Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe → | 270 clicksmaker’s chart | 200 clicks – 270 clicks |
| CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl. | 342 clicksestimated | 318 clicks – 368 clicks |
| ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe → | 368 clicksestimated | 342 clicks – 400 clicks |
| French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe → | 421 clicksmaker’s chart | 400 clicks – 440 clicks |
| Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe → | 467 clicksestimated | 446 clicks – 500 clicks |
Maker’s chart settings are 1Zpresso’s own, from J-Ultra Grind Setting Reference (2023-11-03). Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.
Every grinder on one grind size chart →
Not yours yet?Buy it if you pull espresso and want the finest-stepped hand grinder 1Zpresso makes; if you mostly brew filter, a filter-leaning burr will serve you better. The J-Ultra buying guide →
New to this grinder?
Your first cup on the J-Ultra
- 01
Read the dial
Settings count clicks from zero, the finest the dial goes. Turn it finer until it stops, then count clicks back the other way.
- 02
Set the starting point
Find your brew method in the chart above and set its number. For pour over on the J-Ultra, that is 288 clicks.
- 03
- 04
Change one thing at a time
Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.
Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in
Goes with your J-Ultra
What makes these settings work
A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.
ScaleHario V60 Drip ScaleWeigh the beans and the water, and a sour cup points at the grind, not the dose.How to choose a coffee scale →
KettleHario V60 "Buono" Drip Kettle 1.2LA slow, steady pour is what lets the same setting give the same cup.How to choose a gooseneck kettle →
CleaningPALLO GrindMinder Espresso Grinder BrushReaches into the burr teeth, where old grounds stale the next cup.How to clean a hand grinder →
StaticNormcore RDT Spray BottleA spritz on the beans and less ground coffee clings to the grinder.How to reduce grinder static →
DripperHario V60 Ceramic Coffee Dripper 02The cone most pour-over settings and recipes are written for.How to choose a pour-over dripper →
FiltersHario V60 Paper Filter for 02 Size DripperOther papers drain faster or slower and shift the setting you need.How to choose coffee filters →
How it compares
The J-Ultra against the hand grinders from $129 to $299:
- The finest steps of the 10 with a published figure: 8 µm.
From each maker’s published specs (the J-Ultra’s); a grinder whose maker doesn’t state a figure is left out of that line. Not a test or a score.
Can the 1Zpresso J-Ultra grind for espresso?
Yes. The J-Ultra adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 139 clicks and adjust by taste.
BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.
How much room you have to adjust
That is the resolution you actually have to work with on the J-Ultra. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.
Dialing in the J-Ultra
The J-Ultra widens the useful band relative to the J-Max, trading a little espresso resolution for genuinely usable filter and French press. If you want one hand grinder for everything, this is the one in the range that tries hardest.
Coming from another grinder?
Convert a grind setting to the J-Ultra
If a recipe quotes a setting for a different grinder, this maps it onto the J-Ultra’s dial using the same curve the chart above is built from.
Converting between two grinders that are not this one? Open the full converter.
Owners’ particle-size readings
No readings for the J-Ultra yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.
How these numbers were worked out
Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the J-Ultra are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.
1Zpresso publishes its own brew-method chart for the J-Ultra, and we checked every number against it. The chart above prints 1Zpresso’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: J-Ultra Grind Setting Reference (2023-11-03).
Because the J-Ultra uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.
The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.
Corrections to this page
- 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Own a J-Ultra? Tell us your setting
If you’ve dialled in a method on your own J-Ultra, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.