Skip to main content
BrewMarkBREWMARK

Rocket · Dial-in chart

Rocket Faustino grind settings

On the Rocket Faustino, start pour over at 9.6, espresso at 3 and French press at 13.2. Every other method, with the range to adjust in, is below.

Rocket Faustino
Dial range0 – 18
ScaleNumbered dial
BurrsFlat
Filter reference10

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Faustino’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100018ROCKET FAUSTINO DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Faustino grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Faustino? Start here.

Rocket Faustino grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →3estimated2 – 4.4
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →5estimated4.4 – 6
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →7estimated6 – 8.4
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →9.6estimated8.6 – 10.5
SiphonMedium. Short contact over steady heat, so start here and taste.10.2estimated9.2 – 10.9
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →10.5estimated10 – 11.2
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →10.8estimated10.2 – 11.5
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →11estimated10.5 – 11.8
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.11.2estimated10.6 – 11.8
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →11.8estimated11.2 – 12.6
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →13.2estimated12.5 – 14
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →14.8estimated14 – 16

Rocket doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Faustino reads differently, tell us.

Every grinder on one grind size chart →
Rocket Faustino grind size chart: espresso 3, V60 pour over 9.6, French press 13.2, and 9 more brew methods.
The Rocket Faustino grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if you want a compact, good-looking stepless espresso grinder to match a Rocket machine and you grind one coffee from the hopper. The Faustino buying guide →

New to this grinder?

Your first cup on the Faustino

  1. 01

    Read the dial

    Settings are the numbers printed on the dial. It is stepless, so any point between two numbers is a setting too.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Faustino, that is 9.6.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in

Goes with your Faustino

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

Can the Rocket Faustino grind for espresso?

Yes. The Faustino adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 3 and adjust by taste.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

How much room you have to adjust

Espresso → filter8numbers of adjustment across the fine half of the dial
Filter → coarse6numbers covering filter through to cold brew
Curvelinearflat burrs, interpolated linearly

That is the resolution you actually have to work with on the Faustino. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Faustino

Rocket's grinder, built to sit alongside their espresso machines and tuned accordingly. Stepless, espresso-first, and best judged on how finely it lets you creep toward a target shot time rather than on its coarse range.

Coming from another grinder?

Convert a grind setting to the Faustino

If a recipe quotes a setting for a different grinder, this maps it onto the Faustino’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Faustino yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Faustino are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Rocket doesn’t publish a brew-method chart for the Faustino that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your Faustino reads differently, tell us.

The Faustino’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a Faustino? Tell us your setting

If you’ve dialled in a method on your own Faustino, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts