Skip to main content
BrewMarkBREWMARK

Breville · Dial-in chart

Breville Barista Touch Impress (built-in) grind settings

On the Breville Barista Touch Impress (built-in), start pour over at 16, espresso at 6 and French press at 22. Every other method, with the range to adjust in, is below.

Breville Barista Touch Impress (built-in)
Dial range1 – 30
ScaleNumbered dial
BurrsConical
Filter reference16.4

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Barista Touch Impress (built-in)’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100130BREVILLE BARISTA TOUCH IMPRESS (BUILT-IN) DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Barista Touch Impress (built-in) grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Barista Touch Impress (built-in)? Start here.

Breville Barista Touch Impress (built-in) grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →6estimated4 – 9
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →10estimated9 – 11
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →13estimated11 – 14
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →16estimated15 – 17
SiphonMedium. Short contact over steady heat, so start here and taste.17estimated16 – 18
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →17estimated16 – 19
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →18estimated17 – 19
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →18estimated17 – 20
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.19estimated18 – 20
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →20estimated19 – 21
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →22estimated21 – 23
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →25estimated23 – 27

Breville doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Barista Touch Impress (built-in) reads differently, tell us.

Every grinder on one grind size chart →
Breville Barista Touch Impress (built-in) grind size chart: espresso 6, V60 pour over 16, French press 22, and 9 more brew methods.
The Breville Barista Touch Impress (built-in) grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

New to this grinder?

Your first cup on the Barista Touch Impress (built-in)

  1. 01

    Read the dial

    Settings are the numbers printed on the dial, and it clicks from one to the next with nothing in between.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Barista Touch Impress (built-in), that is 16.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in

Goes with your Barista Touch Impress (built-in)

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

How much room you have to adjust

Espresso → filter12numbers of adjustment across the fine half of the dial
Filter → coarse10.2numbers covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Barista Touch Impress (built-in). Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Barista Touch Impress (built-in)

Built into an espresso machine and tuned for it, with the grind range weighted heavily toward the fine end. Perfectly capable within espresso; if you also brew filter you will find the coarse end short.

Coming from another grinder?

Convert a grind setting to the Barista Touch Impress (built-in)

If a recipe quotes a setting for a different grinder, this maps it onto the Barista Touch Impress (built-in)’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Barista Touch Impress (built-in) yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Barista Touch Impress (built-in) are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Breville doesn’t publish a brew-method chart for the Barista Touch Impress (built-in) that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your Barista Touch Impress (built-in) reads differently, tell us.

Because the Barista Touch Impress (built-in) uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-09-15Each chart now uses its own dial, with every method kept in the same place relative to it.
Every correction, with what the page said before →

Own a Barista Touch Impress (built-in)? Tell us your setting

If you’ve dialled in a method on your own Barista Touch Impress (built-in), the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts