Skip to main content
BrewMarkBREWMARK

Breville · Dial-in chart

Breville Dose Control Pro grind settings

On the Breville Dose Control Pro, start pour over at 34, espresso at 15 and French press at 50. Every other method, with the range to adjust in, is below.

Breville Dose Control Pro
Dial range1 – 60
ScaleNumbered dial
BurrsConical
Filter reference34.7

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Dose Control Pro’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100160BREVILLE DOSE CONTROL PRO DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Dose Control Pro grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Dose Control Pro? Start here.

Breville Dose Control Pro grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →15maker’s chart1 – 25
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →23estimated20 – 26
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →28estimated26 – 31
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →34estimated32 – 37
SiphonMedium. Short contact over steady heat, so start here and taste.36estimated33 – 39
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →37estimated35 – 41
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →39estimated36 – 43
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →40maker’s chart35 – 45
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.41estimated38 – 44
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →44estimated41 – 48
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →50maker’s chart46 – 55
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →56estimated54 – 60

Maker’s chart settings are Breville’s own, from BCG600 Dose Control Pro instruction book (USCM, G23), p.12 'Coffee chart'. Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.

Every grinder on one grind size chart →
Breville Dose Control Pro grind size chart: espresso 15, V60 pour over 34, French press 50, and 9 more brew methods.
The Breville Dose Control Pro grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Worth it used only at a low price, for beginner espresso or pour-over; CoffeeGeek no longer recommends it over the Smart Grinder Pro or Encore ESP. The Dose Control Pro buying guide →

New to this grinder?

Your first cup on the Dose Control Pro

  1. 01

    Read the dial

    Settings are the numbers printed on the dial, and it clicks from one to the next with nothing in between.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Dose Control Pro, that is 34.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in

Goes with your Dose Control Pro

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

How much room you have to adjust

Espresso → filter26.7numbers of adjustment across the fine half of the dial
Filter → coarse25.3numbers covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Dose Control Pro. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Dose Control Pro

Effectively the Smart Grinder Pro sold under a different name in some markets, and it behaves the same way: sixty outer settings plus an internal burr adjustment most owners never discover. If the finest setting still runs fast for espresso, the internal adjustment is the fix.

Coming from another grinder?

Convert a grind setting to the Dose Control Pro

If a recipe quotes a setting for a different grinder, this maps it onto the Dose Control Pro’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Dose Control Pro yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Dose Control Pro are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Breville publishes its own brew-method chart for the Dose Control Pro, and we checked every number against it. The chart above prints Breville’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: BCG600 Dose Control Pro instruction book (USCM, G23), p.12 'Coffee chart'.

Because the Dose Control Pro uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-25Where a Breville manual names a starting setting inside a range, the chart starts there: Smart Grinder Pro espresso 12, French press 58; Dose Control Pro espresso 15, French press 50. The Encore and Virtuoso+ pages now also cite Baratza’s V60 guide and its coarser 23 for lighter roasts.
  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Dose Control Pro? Tell us your setting

If you’ve dialled in a method on your own Dose Control Pro, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts