Skip to main content
BrewMarkBREWMARK

Timemore · Dial-in chart

Timemore Chestnut C3 ESP grind settings

On the Timemore Chestnut C3 ESP, start pour over at 43 clicks, espresso at 21 clicks and French press at 55 clicks. Every other method, with the range to adjust in, is below.

Timemore Chestnut C3 ESP
Dial range0 clicks – 90 clicks
ScaleClicks
BurrsConical
Filter reference44 clicks

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Chestnut C3 ESP’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100090TIMEMORE CHESTNUT C3 ESP DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Chestnut C3 ESP grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

Timemore Chestnut C3 ESP grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.21 clicksmaker’s chart18 clicks – 24 clicks
Moka potFiner than filter, coarser than espresso. No tamping.29 clicksmaker’s chart26 clicks – 32 clicks
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.36 clicksestimated32 clicks – 40 clicks
Pour over — V60 / coneThe reference point for most published pour-over recipes.43 clicksmaker’s chart35 clicks – 50 clicks
SiphonMedium. Short contact over steady heat, so start here and taste.44 clicksestimated42 clicks – 46 clicks
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.45 clicksestimated44 clicks – 47 clicks
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.46 clicksestimated44 clicks – 48 clicks
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.47 clicksestimated45 clicks – 48 clicks
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.47 clicksestimated46 clicks – 48 clicks
ChemexThe thick filter needs a coarser grind to avoid stalling.48 clicksestimated47 clicks – 51 clicks
French pressCoarse. Too fine here is the usual cause of a muddy cup.55 clicksmaker’s chart50 clicks – 60 clicks
Cold brewCoarsest setting you have. 12–18 hours of contact.74 clicksestimated64 clicks – 89 clicks

Maker’s chart settings are Timemore’s own, from Timemore Chestnut ESP user manual, "How to Adjust Grind Setting". Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.

Every grinder on one grind size chart →
Timemore Chestnut C3 ESP grind size chart: espresso 21 clicks, V60 pour over 43 clicks, French press 55 clicks, and 9 more brew methods.
The Timemore Chestnut C3 ESP grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if you want a cheap hand grinder that can make espresso and filter without buying twice; if espresso precision matters, a finer-stepped grinder will serve you better. The Chestnut C3 ESP buying guide →

Can the Timemore Chestnut C3 ESP grind for espresso?

Yes, with limits. The Chestnut C3 ESP reaches espresso fineness, but its steps are coarse there, so one click can move a shot a long way. It suits a pressurized (dual-wall) basket, or the odd shot, better than dialing in a standard basket every day. Start at 21 clicks and adjust by taste.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

The best espresso grinders under $100 →

How much room you have to adjust

Espresso → filter26.4clicks of adjustment across the fine half of the dial
Filter → coarse45.4clicks covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Chestnut C3 ESP. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Coming from another grinder?

Convert a grind setting to the Chestnut C3 ESP

If a recipe quotes a setting for a different grinder, this maps it onto the Chestnut C3 ESP’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Chestnut C3 ESP yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Chestnut C3 ESP are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Timemore publishes its own brew-method chart for the Chestnut C3 ESP, and we checked every number against it. The chart above prints Timemore’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Timemore Chestnut ESP user manual, "How to Adjust Grind Setting".

Because the Chestnut C3 ESP uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Chestnut C3 ESP? Tell us your setting

If you’ve dialled in a method on your own Chestnut C3 ESP, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts