Skip to main content
BrewMarkBREWMARK

Baratza · Dial-in chart

Baratza Vario+ grind settings

On the Baratza Vario+, start pour over at 6M, espresso at 2Q and French press at 10M. Every other method, with the range to adjust in, is below.

Baratza Vario+
Dial range1 – 130
ScaleNumbered dial
BurrsFlat
Filter reference76.7

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Vario+’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–1001130BARATZA VARIO+ DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Vario+ grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Vario+? Start here.

Baratza Vario+ grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →2Qestimated2P – 2R
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →2Sestimated2R – 3P
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →4Mestimated3P – 5N
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →6Mestimated5P – 7L
SiphonMedium. Short contact over steady heat, so start here and taste.6Testimated5U – 7R
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →7Lestimated6Q – 7V
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →7Pestimated6T – 8O
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →7Sestimated7L – 8S
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.7Vestimated7M – 8S
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →8Sestimated7V – 9S
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →10Mestimated9Q – 10P
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →10Restimated10P – 10V

Baratza doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Vario+ reads differently, tell us.

Every grinder on one grind size chart →
Baratza Vario+ grind size chart: espresso 2Q, V60 pour over 6M, French press 10M, and 9 more brew methods.
The Baratza Vario+ grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if espresso comes first but you also brew filter, and you want flat burrs, fine macro-micro adjustment and timed presets in a small footprint. The Vario+ buying guide →

New to this grinder?

Your first cup on the Vario+

  1. 01

    Read the dial

    Settings are a number and a letter, as Baratza prints them: 6M is 6 on the main dial, then M on the fine one.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Vario+, that is 6M.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in

Goes with your Vario+

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

Can the Baratza Vario+ grind for espresso?

Yes. The Vario+ adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 2Q and adjust by taste.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

How much room you have to adjust

Espresso → filter48.5numbers of adjustment across the fine half of the dial
Filter → coarse53.3numbers covering filter through to cold brew
Curvelinearflat burrs, interpolated linearly

That is the resolution you actually have to work with on the Vario+. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Vario+

Two-stage adjustment: a macro lever in steps and a micro slider between them. That means a given "setting" is really a pair, and quoting one number without the other loses information — worth remembering when comparing notes with other Vario owners.

Coming from another grinder?

Convert a grind setting to the Vario+

If a recipe quotes a setting for a different grinder, this maps it onto the Vario+’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Vario+ yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Vario+ are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Baratza doesn’t publish a brew-method chart for the Vario+ that we could find, so its reference points are estimated by comparison with grinders whose makers do. They are a starting point rather than a specification; if your Vario+ reads differently, tell us.

The Vario+’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-22Settings are written as the grinder reads them, a number and a letter, and the chart is fitted to Baratza’s starting points: espresso 2Q, AeroPress 4M, V60 6M and French press 10M exactly. Drip and Chemex sit half a number either side of Baratza’s 7M and 9M, inside the usable range we print.
Every correction, with what the page said before →

Own a Vario+? Tell us your setting

If you’ve dialled in a method on your own Vario+, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts