Baratza Sette 270Baratza · Dial-in chart
Baratza Sette 270 grind settings
On the Baratza Sette 270, start pour over at 15, espresso at 6 and French press at 29. Every other method, with the range to adjust in, is below.

The shape of this dial
The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Sette 270’s own dial. The connectors show how one maps onto the other.
Sette 270 grind size chart, by brew method
Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Sette 270? Start here.
| Method | Setting | Range |
|---|---|---|
| EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe → | 6maker’s chart | 3 – 9 |
| Moka potFiner than filter, coarser than espresso. No tamping.Recipe → | 10estimated | 9 – 11 |
| AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe → | 12maker’s chart | 10 – 15 |
| Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe → | 15maker’s chart | 13 – 18 |
| SiphonMedium. Short contact over steady heat, so start here and taste. | 16estimated | 15 – 20 |
| Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe → | 18estimated | 16 – 22 |
| Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe → | 19estimated | 16 – 23 |
| Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe → | 21maker’s chart | 15 – 25 |
| CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl. | 22estimated | 18 – 25 |
| ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe → | 25maker’s chart | 20 – 31 |
| French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe → | 29estimated | 28 – 29 |
| Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe → | 29estimated | at dial limit |
Maker’s chart settings are Baratza’s own, from Sette 270 Manual v2.1, p.7 'Starting settings'. Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.
Every grinder on one grind size chart →
Not yours yet?Buy it if you make espresso most days and want fast, low-retention timed dosing; look elsewhere if filter coffee or a quiet kitchen matters more. The Sette 270 buying guide →
New to this grinder?
Your first cup on the Sette 270
- 01
Read the dial
Settings are the numbers printed on the dial, and it clicks from one to the next with nothing in between.
- 02
Set the starting point
Find your brew method in the chart above and set its number. For pour over on the Sette 270, that is 15.
- 03
- 04
Change one thing at a time
Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.
Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in
Goes with your Sette 270
What makes these settings work
A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.
ScaleAcaia LunarShots are dialed in by weight in and weight out; it fits under the portafilter.How to choose a coffee scale →
DistributionNormcore 0.25mm WDT Distribution Tool V2.1Breaks up clumps so a fine setting runs evenly instead of channeling.How to fix espresso channeling →
CleaningUrnex Grindz Grinder Cleaning TabletsGround like beans to lift oils from the burrs without taking them out.How to clean a burr grinder →
StaticNormcore RDT Spray BottleA spritz on the beans and less ground coffee clings to the grinder.How to reduce grinder static →
TamperNormcore Spring Loaded Tamper V4A level tamp every time, so a change in the shot is the grind.How to fix espresso channeling →
KettleHario V60 "Buono" Drip Kettle 1.2LA slow, steady pour is what lets the same setting give the same cup.How to choose a gooseneck kettle →
Can the Baratza Sette 270 grind for espresso?
Yes. The Sette 270 adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 6 and adjust by taste.
BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.
How much room you have to adjust
That is the resolution you actually have to work with on the Sette 270. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.
Cold brew sits at the end of the Sette 270’s travel — you can reach it, but there is no room left to adjust further in that direction.
Dialing in the Sette 270
Straight-through grinding means almost no retention, which makes the Sette unusually good for single dosing and switching between coffees. The macro/micro adjustment gives real espresso resolution, and the trade-off is noise — this is the loudest grinder most people will own.
Coming from another grinder?
Convert a grind setting to the Sette 270
If a recipe quotes a setting for a different grinder, this maps it onto the Sette 270’s dial using the same curve the chart above is built from.
Converting between two grinders that are not this one? Open the full converter.
Owners’ particle-size readings
No readings for the Sette 270 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.
How these numbers were worked out
Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Sette 270 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.
Baratza publishes its own brew-method chart for the Sette 270, and we checked every number against it. The chart above prints Baratza’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Sette 270 Manual v2.1, p.7 'Starting settings'.
Because the Sette 270 uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.
The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.
Corrections to this page
- 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Own a Sette 270? Tell us your setting
If you’ve dialled in a method on your own Sette 270, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.