Timemore Sculptor 064Timemore · Dial-in chart
Timemore Sculptor 064 grind settings
On the Timemore Sculptor 064, start pour over at 3.4, espresso at 0.7 and French press at 11.3. Every other method, with the range to adjust in, is below.

The shape of this dial
The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Sculptor 064’s own dial. The connectors show how one maps onto the other.
Sculptor 064 grind size chart, by brew method
Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Sculptor 064? Start here.
| Method | Setting | Range |
|---|---|---|
| EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe → | 0.7estimated | 0 – 1.6 |
| Moka potFiner than filter, coarser than espresso. No tamping.Recipe → | 2estimated | 1.6 – 2.3 |
| AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe → | 2.6estimated | 2.3 – 3 |
| Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe → | 3.4estimated | 3.1 – 4.8 |
| SiphonMedium. Short contact over steady heat, so start here and taste. | 4estimated | 3.3 – 5.8 |
| Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe → | 4.8estimated | 3.5 – 6.5 |
| Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe → | 5.5estimated | 4 – 7.3 |
| Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe → | 6estimated | 4.8 – 8 |
| CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl. | 6.5estimated | 5 – 8 |
| ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe → | 8estimated | 6.5 – 10 |
| French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe → | 11.3estimated | 9.8 – 12.7 |
| Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe → | 14estimated | 12.7 – 16 |
Timemore doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Sculptor 064 reads differently, tell us.
Every grinder on one grind size chart →
Not yours yet?A good used buy for single-dose pour-over brewers who want a compact flat-burr electric; skip it if you will ever want espresso. The Sculptor 064 buying guide →
New to this grinder?
Your first cup on the Sculptor 064
- 01
Read the dial
Settings are the numbers printed on the dial. It is stepless, so any point between two numbers is a setting too.
- 02
Set the starting point
Find your brew method in the chart above and set its number. For pour over on the Sculptor 064, that is 3.4.
- 03
- 04
Change one thing at a time
Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.
Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in
Goes with your Sculptor 064
What makes these settings work
A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.
ScaleHario V60 Drip ScaleWeigh the beans and the water, and a sour cup points at the grind, not the dose.How to choose a coffee scale →
KettleHario V60 "Buono" Drip Kettle 1.2LA slow, steady pour is what lets the same setting give the same cup.How to choose a gooseneck kettle →
DripperHario V60 Ceramic Coffee Dripper 02The cone most pour-over settings and recipes are written for.How to choose a pour-over dripper →
FiltersHario V60 Paper Filter for 02 Size DripperOther papers drain faster or slower and shift the setting you need.How to choose coffee filters →
How much room you have to adjust
That is the resolution you actually have to work with on the Sculptor 064. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.
Dialing in the Sculptor 064
Timemore's move upmarket into electric flat-burr grinding, with a genuinely usable espresso range unlike their hand grinders. Single dose oriented, and noticeably more consistent through filter than the C-series it sits above.
Coming from another grinder?
Convert a grind setting to the Sculptor 064
If a recipe quotes a setting for a different grinder, this maps it onto the Sculptor 064’s dial using the same curve the chart above is built from.
Converting between two grinders that are not this one? Open the full converter.
Owners’ particle-size readings
No readings for the Sculptor 064 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.
How these numbers were worked out
Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Sculptor 064 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.
Timemore doesn’t publish a brew-method chart for the Sculptor 064 that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your Sculptor 064 reads differently, tell us.
The Sculptor 064’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.
The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.
Own a Sculptor 064? Tell us your setting
If you’ve dialled in a method on your own Sculptor 064, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.