Skip to main content
BrewMarkBREWMARK

Timemore · Dial-in chart

Timemore Sculptor 078 grind settings

On the Timemore Sculptor 078, start pour over at 4 and French press at 12.5. It isn’t built for espresso (why). Every other method, with the range to adjust in, is below.

Timemore Sculptor 078
Dial range0 – 18
ScaleNumbered dial
BurrsFlat
Filter reference4

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Sculptor 078’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100018TIMEMORE SCULPTOR 078 DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Sculptor 078 grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Sculptor 078? Start here.

Timemore Sculptor 078 grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →1estimated0 – 2
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →2.5estimated2 – 3
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →3estimated3 – 3.5
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →4estimated3.5 – 5.5
SiphonMedium. Short contact over steady heat, so start here and taste.4.5estimated4 – 6.5
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →5.5estimated4 – 7
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →6estimated4.5 – 8
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →6.5estimated5.5 – 9
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.7estimated5.5 – 9
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →9estimated7 – 11
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →12.5estimated10.5 – 14
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →15.5estimated14 – 18

Timemore doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Sculptor 078 reads differently, tell us.

Every grinder on one grind size chart →
Timemore Sculptor 078 grind size chart: espresso 1, V60 pour over 4, French press 12.5, and 9 more brew methods.
The Timemore Sculptor 078 grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if you single-dose light roasts for pour-over and want a distinctive, juicy cup with speed control; skip it for espresso or as your only grinder. The Sculptor 078 buying guide →

New to this grinder?

Your first cup on the Sculptor 078

  1. 01

    Read the dial

    Settings are the numbers printed on the dial. Where one has a decimal, set the dial that far between the two numbers.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Sculptor 078, that is 4.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in

Goes with your Sculptor 078

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

How it compares

The Sculptor 078 against the electric grinders from $519 to $1199:

  • 78 mm burrs; of the 17 with a published figure, only the Niche Duo is larger, at 83 mm. Compare →

From each maker’s published specs (the Sculptor 078’s); a grinder whose maker doesn’t state a figure is left out of that line. Not a test or a score.

Can the Timemore Sculptor 078 grind for espresso?

Not really. The Sculptor 078 can't grind fine enough for a standard single-wall espresso basket; shots run fast and taste sour. The espresso row on the chart is a starting point for a pressurized (dual-wall) basket, which is built to forgive a coarser grind.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

The best espresso grinders →

How much room you have to adjust

Espresso → filter4numbers of adjustment across the fine half of the dial
Filter → coarse14numbers covering filter through to cold brew
Curvelinearflat burrs, interpolated linearly

That is the resolution you actually have to work with on the Sculptor 078. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Sculptor 078

The larger-burr Sculptor, and the one with a caveat worth knowing before you buy. The plain 078 ships Timemore's Turbo — “ghost” — burrs: pyramid-cut, aimed at a unimodal grind with few fines and little heat, and built for pour over. Owners consistently report it will not go fine enough for espresso, and its adjustment is stepped where the 078S is stepless. If espresso matters, the 078S is the model with the flat burrs and the fine control; this one is a filter grinder that happens to be excellent at it. Seventeen numbers cover espresso through filter here, so the brew range has real resolution. Retention is genuinely low once the rotary knocker has cleared the chute.

Coming from another grinder?

Convert a grind setting to the Sculptor 078

If a recipe quotes a setting for a different grinder, this maps it onto the Sculptor 078’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Sculptor 078 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Sculptor 078 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Timemore doesn’t publish a brew-method chart for the Sculptor 078 that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your Sculptor 078 reads differently, tell us.

The Sculptor 078’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a Sculptor 078? Tell us your setting

If you’ve dialled in a method on your own Sculptor 078, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts