Skip to main content
BrewMarkBREWMARK

Turin · Dial-in chart

Turin DF83 V2 grind settings

On the Turin DF83 V2, start pour over at 44.6, espresso at 22 and French press at 76.9. Every other method, with the range to adjust in, is below.

Dial range0 – 90
ScaleNumbered dial
BurrsFlat
Filter reference45

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the DF83 V2’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100090TURIN DF83 V2 DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

DF83 V2 grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser.

Turin DF83 V2 grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.22estimated13 – 34.6
Moka potFiner than filter, coarser than espresso. No tamping.40estimated34.6 – 41
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.42estimated41 – 43.4
Pour over — V60 / coneThe reference point for most published pour-over recipes.44.6estimated43.6 – 50.2
SiphonMedium. Short contact over steady heat, so start here and taste.47.1estimated44.2 – 54.3
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.50.2estimated45 – 57.4
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.53.3estimated47.1 – 60.5
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.55.3estimated50.2 – 63.6
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.57.4estimated51.2 – 63.6
ChemexThe thick filter needs a coarser grind to avoid stalling.63.6estimated57.4 – 71.9
French pressCoarse. Too fine here is the usual cause of a muddy cup.76.9estimated70.8 – 80.3
Cold brewCoarsest setting you have. 12–18 hours of contact.83.8estimated80.3 – 89

Turin doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your DF83 V2 reads differently, tell us.

Every grinder on one grind size chart →
Turin DF83 V2 grind size chart: espresso 22, V60 pour over 44.6, French press 76.9, and 9 more brew methods.
The Turin DF83 V2 grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?A sensible used buy for single-dose espresso drinkers who want big flat burrs and an easy burr-upgrade path; skip it if noise, static or counter space worry you. The DF83 V2 buying guide →

How much room you have to adjust

Espresso → filter32numbers of adjustment across the fine half of the dial
Filter → coarse44numbers covering filter through to cold brew
Curvelinearflat burrs, interpolated linearly

That is the resolution you actually have to work with on the DF83 V2. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the DF83 V2

The larger-burr sibling to the DF64, aimed at people who want more speed and a flatter particle distribution. Espresso is the design centre, though it covers filter more comfortably than the 64mm version.

Coming from another grinder?

Convert a grind setting to the DF83 V2

If a recipe quotes a setting for a different grinder, this maps it onto the DF83 V2’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the DF83 V2 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the DF83 V2 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Turin doesn’t publish a brew-method chart for the DF83 V2 that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your DF83 V2 reads differently, tell us.

The DF83 V2’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Own a DF83 V2? Tell us your setting

If you’ve dialled in a method on your own DF83 V2, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts