Skip to main content
BrewMarkBREWMARK

Baratza · Dial-in chart

Baratza Sette 270Wi grind settings

On the Baratza Sette 270Wi, start pour over at 16, espresso at 6 and French press at 25. Every other method, with the range to adjust in, is below.

Baratza Sette 270Wi
Dial range1 – 31
ScaleNumbered dial
BurrsConical
Filter reference16.4

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Sette 270Wi’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100131BARATZA SETTE 270WI DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Sette 270Wi grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Sette 270Wi? Start here.

Baratza Sette 270Wi grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →6maker’s chart3 – 9
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →9estimated8 – 11
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →12maker’s chart10 – 15
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →16maker’s chart13 – 18
SiphonMedium. Short contact over steady heat, so start here and taste.17estimated15 – 19
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →18estimated16 – 20
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →19estimated17 – 21
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →19maker’s chart15 – 25
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.20estimated18 – 22
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →22estimated20 – 24
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →25estimated24 – 26
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →27estimated26 – 28

Maker’s chart settings are Baratza’s own, from Sette 270Wi Manual v2.4, p.6 'Recommended initial settings'. Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.

Every grinder on one grind size chart →
Baratza Sette 270Wi grind size chart: espresso 6, V60 pour over 16, French press 25, and 9 more brew methods.
The Baratza Sette 270Wi grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if you make espresso most days and want hands-free dosing by weight; look elsewhere if filter coffee or a quiet kitchen matters more. The Sette 270Wi buying guide →

New to this grinder?

Your first cup on the Sette 270Wi

  1. 01

    Read the dial

    Settings are the numbers printed on the dial, and it clicks from one to the next with nothing in between.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Sette 270Wi, that is 16.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in

Goes with your Sette 270Wi

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

How it compares

The Sette 270Wi against the electric grinders from $390 to $900:

  • Holds 300 g of beans; of the 16 with a published figure, only the Rocket Faustino is bigger, at 320 g. Compare →

From each maker’s published specs (the Sette 270Wi’s); a grinder whose maker doesn’t state a figure is left out of that line. Not a test or a score.

Can the Baratza Sette 270Wi grind for espresso?

Yes. The Sette 270Wi adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 6 and adjust by taste.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

How much room you have to adjust

Espresso → filter12numbers of adjustment across the fine half of the dial
Filter → coarse11.6numbers covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Sette 270Wi. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Sette 270Wi

The Sette 270 with an integrated scale, grinding to weight rather than time. Same straight-through, near-zero-retention design and the same macro/micro adjustment — and the same considerable noise.

Coming from another grinder?

Convert a grind setting to the Sette 270Wi

If a recipe quotes a setting for a different grinder, this maps it onto the Sette 270Wi’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Sette 270Wi yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Sette 270Wi are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Baratza publishes its own brew-method chart for the Sette 270Wi, and we checked every number against it. The chart above prints Baratza’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Sette 270Wi Manual v2.4, p.6 'Recommended initial settings'.

Because the Sette 270Wi uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Sette 270Wi? Tell us your setting

If you’ve dialled in a method on your own Sette 270Wi, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts