Skip to main content
BrewMarkBREWMARK

Baratza · Dial-in chart

Baratza Virtuoso+ grind settings

On the Baratza Virtuoso+, start pour over at 15, espresso at 8 and French press at 28. Every other method, with the range to adjust in, is below.

Baratza Virtuoso+
Dial range1 – 40
ScaleNumbered dial
BurrsConical
Filter reference15

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Virtuoso+’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100140BARATZA VIRTUOSO+ DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Virtuoso+ grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Virtuoso+? Start here.

Baratza Virtuoso+ grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →8maker’s chart7 – 10
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →11estimated10 – 12
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →12maker’s chart12 – 13
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →15maker’s chart14 – 17
SiphonMedium. Short contact over steady heat, so start here and taste.16estimated14 – 18
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →17estimated15 – 19
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →18estimated16 – 20
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →18maker’s chart17 – 21
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.19estimated17 – 21
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →20maker’s chart19 – 25
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →28maker’s chart24 – 30
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →34estimated30 – 39

Maker’s chart settings are Baratza’s own, from Virtuoso+ Operations Manual v1.6, p.6 table. Estimated ones sit on the same dial curve, fitted through the maker’s. Baratza's V60 brew guide suggests starting coarser, at 23, for a lighter roast; the manual's 15 is the general starting point. (Baratza: Hario V60 brew guide). Own one? Tell us the setting you use.

Every grinder on one grind size chart →
Baratza Virtuoso+ grind size chart: espresso 8, V60 pour over 15, French press 28, and 9 more brew methods.
The Baratza Virtuoso+ grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it if you brew filter every day and want a serviceable hopper grinder with a precise timer; look elsewhere if espresso is the goal. The Virtuoso+ buying guide →

New to this grinder?

Your first cup on the Virtuoso+

  1. 01

    Read the dial

    Settings are the numbers printed on the dial, and it clicks from one to the next with nothing in between.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Virtuoso+, that is 15.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in

Goes with your Virtuoso+

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

How it compares

The Virtuoso+ against the electric grinders from $162 to $374:

  • Holds 300 g of beans; of the 9 with a published figure, only the Breville Smart Grinder Pro is bigger, at 510 g. Compare →

From each maker’s published specs (the Virtuoso+’s); a grinder whose maker doesn’t state a figure is left out of that line. Not a test or a score.

Can the Baratza Virtuoso+ grind for espresso?

Yes, with limits. The Virtuoso+ reaches espresso fineness, but its steps are coarse there, so one click can move a shot a long way. It suits a pressurized (dual-wall) basket, or the odd shot, better than dialing in a standard basket every day. Start at 8 and adjust by taste.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

The best espresso grinders under $500 →

How much room you have to adjust

Espresso → filter8.5numbers of adjustment across the fine half of the dial
Filter → coarse24.2numbers covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Virtuoso+. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Virtuoso+

Same 40-step collar as the Encore, meaningfully better burrs. The practical difference is not the range but the spread within it — at any given number the Virtuoso+ produces fewer fines, so a setting that ran bitter on an Encore often lands clean here. If you are migrating from an Encore, start at the same number rather than compensating, then adjust by taste.

Coming from another grinder?

Convert a grind setting to the Virtuoso+

If a recipe quotes a setting for a different grinder, this maps it onto the Virtuoso+’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Virtuoso+ yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Virtuoso+ are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

Baratza publishes its own brew-method chart for the Virtuoso+, and we checked every number against it. The chart above prints Baratza’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Virtuoso+ Operations Manual v1.6, p.6 table.

Because the Virtuoso+ uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-25Where a Breville manual names a starting setting inside a range, the chart starts there: Smart Grinder Pro espresso 12, French press 58; Dose Control Pro espresso 15, French press 50. The Encore and Virtuoso+ pages now also cite Baratza’s V60 guide and its coarser 23 for lighter roasts.
  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Virtuoso+? Tell us your setting

If you’ve dialled in a method on your own Virtuoso+, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts