Eureka Mignon LibraEureka · Dial-in chart
Eureka Mignon Libra grind settings
On the Eureka Mignon Libra, start pour over at 1+1.5, espresso at 2.5 and French press at 1+5.5. Every other method, with the range to adjust in, is below.

The shape of this dial
The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Mignon Libra’s own dial. The connectors show how one maps onto the other.
Mignon Libra grind size chart, by brew method
Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Mignon Libra? Start here.
| Method | Setting | Range |
|---|---|---|
| EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe → | 2.5estimated | 1.5 – 3.5 |
| Moka potFiner than filter, coarser than espresso. No tamping.Recipe → | 4estimated | 3.5 – 4.5 |
| AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe → | 5.5estimated | 4.5 – 1+0.5 |
| Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe → | 1+1.5estimated | 1+1 – 1+2.5 |
| SiphonMedium. Short contact over steady heat, so start here and taste. | 1+2estimated | 1+1.5 – 1+3 |
| Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe → | 1+2.5estimated | 1+2 – 1+3.5 |
| Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe → | 1+3estimated | 1+2 – 1+4 |
| Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe → | 1+3estimated | 1+2.5 – 1+4 |
| CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl. | 1+3.5estimated | 1+2.5 – 1+4 |
| ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe → | 1+4estimated | 1+3.5 – 1+5 |
| French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe → | 1+5.5estimated | 1+5 – 2+0.5 |
| Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe → | 2+1.5estimated | 2+0.5 – 2+3 |
Eureka doesn’t publish a brew-method chart we could find, so these are estimated from comparable grinders. If your Mignon Libra reads differently, tell us.
Every grinder on one grind size chart →
Not yours yet?Buy it if you make espresso every day and want each dose ground straight to weight, without a separate scale or retiming. The Mignon Libra buying guide →
New to this grinder?
Your first cup on the Mignon Libra
- 01
Read the dial
Settings count turns from zero, the finest the dial goes, then the number within the turn. The dial has 6 numbers per turn, so 1+1.5 is 1 full turn, then on to 1.5.
- 02
Set the starting point
Find your brew method in the chart above and set its number. For pour over on the Mignon Libra, that is 1+1.5.
- 03
- 04
Change one thing at a time
Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.
Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in
Goes with your Mignon Libra
What makes these settings work
A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.
ScaleAcaia LunarShots are dialed in by weight in and weight out; it fits under the portafilter.How to choose a coffee scale →
DistributionNormcore 0.25mm WDT Distribution Tool V2.1Breaks up clumps so a fine setting runs evenly instead of channeling.How to fix espresso channeling →
CleaningUrnex Grindz Grinder Cleaning TabletsGround like beans to lift oils from the burrs without taking them out.How to clean a burr grinder →
StaticNormcore RDT Spray BottleA spritz on the beans and less ground coffee clings to the grinder.How to reduce grinder static →
TamperNormcore Spring Loaded Tamper V4A level tamp every time, so a change in the shot is the grind.How to fix espresso channeling →
KettleHario V60 "Buono" Drip Kettle 1.2LA slow, steady pour is what lets the same setting give the same cup.How to choose a gooseneck kettle →
Can the Eureka Mignon Libra grind for espresso?
Yes. The Mignon Libra adjusts in steps fine enough to dial in a shot on a standard single-wall basket, which is what most espresso recipes assume. Start at 2.5 and adjust by taste.
BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.
How much room you have to adjust
That is the resolution you actually have to work with on the Mignon Libra. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.
Dialing in the Mignon Libra
The Mignon with an integrated scale, grinding by weight rather than time. The dial behaves like the rest of the Mignon range; what changes is dose repeatability, not grind character.
Coming from another grinder?
Convert a grind setting to the Mignon Libra
If a recipe quotes a setting for a different grinder, this maps it onto the Mignon Libra’s dial using the same curve the chart above is built from.
Converting between two grinders that are not this one? Open the full converter.
Owners’ particle-size readings
No readings for the Mignon Libra yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.
How these numbers were worked out
Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Mignon Libra are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.
Eureka doesn’t publish a brew-method chart for the Mignon Libra that we could find, so its reference points are estimated by comparison with grinders whose makers do. The moka and French press points in particular were interpolated from the pattern the rest of the catalog shows rather than read off a chart for this grinder. They are a starting point rather than a specification; if your Mignon Libra reads differently, tell us.
The Mignon Libra’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.
The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.
Own a Mignon Libra? Tell us your setting
If you’ve dialled in a method on your own Mignon Libra, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.