Skip to main content
BrewMarkBREWMARK

OXO · Dial-in chart

OXO Brew Conical Burr grind settings

On the OXO Brew Conical Burr, start pour over at 7.4 and French press at 12.6. It isn’t built for espresso (why). Every other method, with the range to adjust in, is below.

OXO Brew Conical Burr
Dial range1 – 15
ScaleNumbered dial
BurrsConical
Filter reference7.4

The shape of this dial

The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Brew Conical Burr’s own dial. The connectors show how one maps onto the other.

FINECOARSEGRIND INDEX 0–100115OXO BREW CONICAL BURR DIALEspressoV60French pressCold brew
Where the lines bunch, the dial is compressed — small moves count for more

Brew Conical Burr grind size chart, by brew method

Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Brew Conical Burr? Start here.

OXO Brew Conical Burr grind settings for espresso, moka pot, AeroPress, pour over, drip, Chemex, French press and cold brew
MethodSettingRange
EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe →3.4maker’s chart1 – 5
Moka potFiner than filter, coarser than espresso. No tamping.Recipe →7estimated6.5 – 7.2
AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe →7.3estimated7.2 – 7.3
Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe →7.4maker’s chart6 – 10
SiphonMedium. Short contact over steady heat, so start here and taste.7.5estimated7.3 – 8.4
Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe →7.8estimated7.4 – 9
Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe →8.2estimated7.5 – 9.6
Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe →8.6maker’s chart6 – 10
CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl.9estimated7.9 – 10.3
ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe →10.3estimated9 – 11.9
French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe →12.6maker’s chart11 – 15
Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe →13.2maker’s chart11 – 15

Maker’s chart settings are OXO’s own, from OXO Brew Conical Burr Coffee Grinder 8717000 user manual, grind chart. Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.

Every grinder on one grind size chart →
OXO Brew Conical Burr grind size chart: espresso 3.4, V60 pour over 7.4, French press 12.6, and 9 more brew methods.
The OXO Brew Conical Burr grind size chart as an image: every method, its setting and range, and where each sits on the dial. Download the chart (PNG).

Not yours yet?Buy it as a first step up from a blade grinder if you mostly brew drip or pour-over; skip it for espresso, French press or cold brew. The Brew Conical Burr buying guide →

New to this grinder?

Your first cup on the Brew Conical Burr

  1. 01

    Read the dial

    Settings are the numbers printed on the dial. Where one has a decimal, set the dial that far between the two numbers.

  2. 02

    Set the starting point

    Find your brew method in the chart above and set its number. For pour over on the Brew Conical Burr, that is 7.4.

  3. 03

    Brew, then taste

    Sour or thin means the grind is too coarse: go finer, to a lower number. Bitter or harsh means too fine: go coarser, to a higher number. More on fixing sour and bitter coffee.

  4. 04

    Change one thing at a time

    Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.

Words on this pageGrind size · Conical burrs · Grind index · Extraction · Dialing in

Goes with your Brew Conical Burr

What makes these settings work

A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.

Can the OXO Brew Conical Burr grind for espresso?

Not really. The Brew Conical Burr can't grind fine enough for a standard single-wall espresso basket; shots run fast and taste sour. The espresso row on the chart is a starting point for a pressurized (dual-wall) basket, which is built to forgive a coarser grind.

BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.

The best espresso grinders under $100 →

How much room you have to adjust

Espresso → filter6.4numbers of adjustment across the fine half of the dial
Filter → coarse6numbers covering filter through to cold brew
Curvesplineconical burrs, fitted with a monotone curve

That is the resolution you actually have to work with on the Brew Conical Burr. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.

Dialing in the Brew Conical Burr

An entry electric grinder aimed squarely at drip and pour over. Adequate through the filter range and progressively less consistent as you go finer; treat the bottom of the dial as a floor rather than an espresso range.

Coming from another grinder?

Convert a grind setting to the Brew Conical Burr

If a recipe quotes a setting for a different grinder, this maps it onto the Brew Conical Burr’s dial using the same curve the chart above is built from.

Converting between two grinders that are not this one? Open the full converter.

Owners’ particle-size readings

No readings for the Brew Conical Burr yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.

How these numbers were worked out

Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Brew Conical Burr are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.

OXO publishes its own brew-method chart for the Brew Conical Burr, and we checked every number against it. The chart above prints OXO’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: OXO Brew Conical Burr Coffee Grinder 8717000 user manual, grind chart.

Because the Brew Conical Burr uses conical burrs, the curve between those points is fitted with a monotone cubic spline rather than straight lines. Conical burr dials are rarely linear, and the spline guarantees the curve never doubles back — a coarser index always produces a coarser setting.

The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.

Corrections to this page

  • 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
Every correction, with what the page said before →

Own a Brew Conical Burr? Tell us your setting

If you’ve dialled in a method on your own Brew Conical Burr, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.

← All grinder charts