Fellow Ode Gen 2Fellow · Dial-in chart
Fellow Ode Gen 2 grind settings
On the Fellow Ode Gen 2, start pour over at 6.2 and French press at 9. It isn’t built for espresso (why). Every other method, with the range to adjust in, is below.

The shape of this dial
The top line is the universal grind index every BrewMark recipe uses. The bottom line is the Ode Gen 2’s own dial. The connectors show how one maps onto the other.
Ode Gen 2 grind size chart, by brew method
Start at the recommended setting, brew, then move within the range by taste. Sour or weak means go finer; bitter or harsh means go coarser. New to the Ode Gen 2? Start here.
| Method | Setting | Range |
|---|---|---|
| EspressoFine. Aim for a 25–30s shot and adjust from there.First recipe → | 1.2estimated | 1 – 2.2 |
| Moka potFiner than filter, coarser than espresso. No tamping.Recipe → | 3estimated | 2.2 – 3.2 |
| AeroPress (short steep)For 1–2 minute recipes. Go coarser for longer steeps.Recipe → | 4.2maker’s chart | 3 – 6 |
| Pour over — V60 / coneThe reference point for most published pour-over recipes.First recipe → | 6.2maker’s chart | 4 – 8 |
| SiphonMedium. Short contact over steady heat, so start here and taste. | 7estimated | 6.1 – 7.2 |
| Pour over — flat bottomKalita, Orea and similar. Slightly coarser than a cone.Recipe → | 7.1estimated | 7 – 7.2 |
| Steep and release — Clever / SwitchSteep, then drain through a paper filter. If it drains slowly, go coarser.Recipe → | 7.1estimated | 7 – 8 |
| Drip / batch brewAutomatic brewers. Coarser to suit the longer contact time.First recipe → | 7.2maker’s chart | 7 – 9 |
| CuppingMedium-coarse, for tasting side by side. Keep it the same across every bowl. | 7maker’s chart | 6 – 7 |
| ChemexThe thick filter needs a coarser grind to avoid stalling.Recipe → | 8estimated | 7.2 – 8.2 |
| French pressCoarse. Too fine here is the usual cause of a muddy cup.First recipe → | 9maker’s chart | 8 – 10 |
| Cold brewCoarsest setting you have. 12–18 hours of contact.Recipe → | 10maker’s chart | 9 – 11 |
Maker’s chart settings are Fellow’s own, from Ode Brew Grinder Gen 2 'Get to know you' guide V5, p.4 'Grind settings'. Estimated ones sit on the same dial curve, fitted through the maker’s. Own one? Tell us the setting you use.
Every grinder on one grind size chart →
Not yours yet?Buy it if you brew pour-over, drip or French press and want flat-burr clarity in a quiet, tidy grinder; skip it if you will ever make espresso. The Ode Gen 2 buying guide →
New to this grinder?
Your first cup on the Ode Gen 2
- 01
Read the dial
The dial has 2 small marks between each number. A setting like 6.2 means the second mark after 6, not a decimal.
- 02
Set the starting point
Find your brew method in the chart above and set its number. For pour over on the Ode Gen 2, that is 6.2.
- 03
- 04
Change one thing at a time
Make one small change to the grind and brew again, keeping the coffee, dose and water the same. The range beside each method is how far to go before something else is the problem.
Words on this pageGrind size · Flat burrs · Grind index · Extraction · Dialing in
Goes with your Ode Gen 2
What makes these settings work
A setting only repeats if the dose and the pour do too. Picked for how this grinder is used, not ranked, and nothing here is sponsored. Each one links to the guide that explains it.
ScaleHario V60 Drip ScaleWeigh the beans and the water, and a sour cup points at the grind, not the dose.How to choose a coffee scale →
KettleHario V60 "Buono" Drip Kettle 1.2LA slow, steady pour is what lets the same setting give the same cup.How to choose a gooseneck kettle →
BurrsFellow Ode Gen 2 Brew BurrsFellow's own replacement burrs, for when the cup goes flat at a setting that used to work.How to replace grinder burrs →
CleaningUrnex Grindz Grinder Cleaning TabletsGround like beans to lift oils from the burrs without taking them out.How to clean a Fellow Ode Gen 2 →
StaticNormcore RDT Spray BottleA spritz on the beans and less ground coffee clings to the grinder.How to reduce grinder static →
DripperHario V60 Ceramic Coffee Dripper 02The cone most pour-over settings and recipes are written for.How to choose a pour-over dripper →
How it compares
The Ode Gen 2 against the electric grinders from $259 to $599:
- 64 mm burrs; of the 15 with a published figure, only the Option-O Lagom Casa is larger, at 65 mm. Compare →
From each maker’s published specs (the Ode Gen 2’s); a grinder whose maker doesn’t state a figure is left out of that line. Not a test or a score.
Can the Fellow Ode Gen 2 grind for espresso?
Not really. The Ode Gen 2 can't grind fine enough for a standard single-wall espresso basket; shots run fast and taste sour. The espresso row on the chart is a starting point for a pressurized (dual-wall) basket, which is built to forgive a coarser grind.
BrewMark’s rating, from the maker’s specs and published reviews listed in the buying guide. We haven’t tested it.
The best espresso grinders under $500 →How much room you have to adjust
That is the resolution you actually have to work with on the Ode Gen 2. Where the number is small, a single step moves the cup more than you would expect — so change one at a time and taste before moving again.
Dialing in the Ode Gen 2
A flat-burr brew grinder that deliberately does not attempt espresso, and is better for the focus. The Gen 2 burrs cut fines substantially versus the original, which is why its filter range sits in a narrower band than the number of settings suggests. The markings between whole numbers are real and worth using — most of the useful pour-over territory lives between two adjacent integers.
Coming from another grinder?
Convert a grind setting to the Ode Gen 2
If a recipe quotes a setting for a different grinder, this maps it onto the Ode Gen 2’s dial using the same curve the chart above is built from.
Converting between two grinders that are not this one? Open the full converter.
Owners’ particle-size readings
No readings for the Ode Gen 2 yet. If you own one, you can measure your grind with a phone photo; readings are reviewed, then shown here.
How these numbers were worked out
Every grinder gets mapped onto a shared 0–100 grind index, where 0 is espresso-fine and 100 is the coarsest useful setting. Five reference points on the Ode Gen 2 are placed on that scale — espresso, moka, filter, French press and coarse — and the settings in between are interpolated.
Fellow publishes its own brew-method chart for the Ode Gen 2, and we checked every number against it. The chart above prints Fellow’s settings for the methods it names, and the reference points are fitted so the curve follows them; the other methods, and every conversion to and from this grinder, are read off that curve. Source: Ode Brew Grinder Gen 2 'Get to know you' guide V5, p.4 'Grind settings'.
The Ode Gen 2’s dial is interpolated linearly between those reference points, which is the right model for its burr geometry.
The result is that “medium-fine” resolves to a real number on this grinder rather than a vague instruction. It is a starting point, not a guarantee — burr wear, bean density and roast level all move the target, which is why every row above gives a range as well as a number.
Corrections to this page
- 2026-10-23For every grinder whose maker publishes a brew-method chart, the chart now prints the maker’s own settings for the methods it names, checked against the maker’s document, and the rest follow a dial curve fitted through them. Per-setting micron figures are gone; particle sizes are given only for espresso, drip and cupping, where independent sources agree.
- 2026-10-22Written as the number and which mark after it, the way owners count them: on an Ode, 4, 4.1, 4.2, then 5; on an Opus, up to 4.3. The positions themselves did not change. A setting typed as 4.2 for these grinders is now read as the second mark.
- 2026-09-14French press is now 9.1 and cold brew 10.2. Superseded on 2026-10-23 by Fellow’s own guide: French press 8–10 (starting at 9), cold brew 9–11 (starting at 10).
Own a Ode Gen 2? Tell us your setting
If you’ve dialled in a method on your own Ode Gen 2, the number you landed on is the best evidence there is. Readings are checked by hand before anything changes here.